Home > Equipment & Supplies > Equipment & Supplies > Parts
Choose a sub category:
Parts Wheels, Casters, Legs
Parts
Sort By:
Page of 1
B-0413 B-0133-B 062X
Swivel to Rigid Adapter EasyInstall Pre-Rinse Unit, wall mount. base faucet with spring check cart. & lever handles, 2" diameter flanges with 1/2" NPT female eccentric flanged inlets, 35-1/2"H, 15" overhang, 8-1/4" clearance, 18" riser, B-0107 spray valve, B-0044-H flex stainless steel hose, 6" wall bracket Swing Nozzle, 12" (deduct cost of standard nozzle)
B-3950 061X 063X
Waste Valve, twist handle, 3-1/2" sink opening, 2" drain outlet with 1-1/2" adapter (replaces B-3912, B-3916) Swing Nozzle, 10" (deduct cost of standard nozzle) Swing Nozzle, 14" (deduct cost of standard nozzle)
B-0107 B-0113-B B-2278
Spray Valve Assembly, with hold down ring & rubber bumper EasyInstall Pre-Rinse Unit, spring action gooseneck & hole base faucet, 18" flexible stainless steel supply lines with comp. fittings for 5/8" OD copper tubing, 45"H, 14" overhang, 19-3/8" clearance, 24" riser, spray valve (B-0107), stainless steel hose (B-0044-H) and 6" wall bracket Pre-Rinse Unit, 8" center wall mounted faucet, vacuum breaker between base of faucet and riser, 1/2 NPT female inlets, 39-7/16" height, 15'' overhang, B-0107 spray valve
B-10K B-0230-K 001121-45
Repair Kit, for B-0107 spray valve Installation Kit , (2) 1/2" NPT nipples, lock nuts and washers, (2) short "Ell" 1/2" NPT female x male Spray Valve, sprayface
001014-45 010476-45 B-0155-LNEZ
Washer Hose Washer Add-on Faucet, less nozzle, for Pre-Rinse Units, EasyInstall fittings
000888-45 ROY CO 1 G B-0231
Pre-Rinse Spring Replacement Gear, No. 1, for model ROY CO 1 Sink Mixing Faucet, 12" swing nozzle, wall mounted, 8" centers on sink faucet with 1/2" IPS eccentric flanged female inlets, lever handles
B-0230-LN B-0665-BSTR B-0044-H
Sink Mixing Faucet, wall mounted, 8" centers on sink faucet with 1/2" IPS eccentric flanged female inlets, lever handles Service Sink Faucet, 8" centers, 2-3/8" clearance from wall to center of faucet, 8-7/8" from wall to center of outlet, rough chrome plated finish, vacuum breaker nozzle with 3/4" garden hose thread & pail hook, built in screwdriver stops Hose, 44" flexible, inner rubber tubing, supplied on most pre-rinse units with spring action gooseneck, stainless steel
B-2278-01 005960-40 ROY CO 2 G
Pre-Rinse Unit, 8" centers, wall mount, add-on faucet with 12" swing nozzle, wall bracket, 44" stainless steel hose & vacuum breaker, 1/2" NPT female inlets Eterna Spindle Assembly, 2-7/8" high, hot (right hand) RTC Replacement Gear, No. 2, for model ROY CO 2
28-111S DRIPPAN-SSDD 068X
Krowne Plate Caster, Swivel w/brake, 5" Diameter, 3-1/2" x 3-1/2", 220lbs per caster load capacity, grease resistant, raises height of equipment 6" (set of 4) Drip Pan (per section), stainless steel Double Jointed Nozzle, 18" (deduct cost of standard nozzle)
005959-40 BCKRISR-W36BR_CF BCKRISR-W60BR_CF
Eterna Spindle Assembly, 2-7/8" high, cold (left hand) LTC Reinforced Riser, for salamander mounting, for V36 economy range (Contact factory for price) Reinforced Riser, for salamander mounting, for V60/V60F economy range (Contact factory for price)